Correcting fuelling is always the most important part of making power! Always!
 
This service is perfect for bikes that already have Power Commanders, Bazzaz units or that already have perfectly tuned fuelling - I will not make any fuelling changes without having the bike on a dyno, that could just create problems.
 
I have spent many, hours on the dyno with a few of these bikes, perfecting this base flash.
 
I can make some basic changes to your stock ecu settings that will greatly de-restrict your bike, without going too far and making any changes that could harm your bike.
 
All bikes are different, what works for one, will usually not work for another;
I will fine tune the mapping on your ecu and NEVER load a map from another bike.
 
On this model at your request we can... 
- Change your ECU Region (Some US and European maps are very restricted)
- Adjust Idle
- Secondary throttle flap maps
- Remove restrictions in the Exhaust Flap 
- Remove restrictions in the Ignition timing maps
- Remove your top speed limiter
- Adjust your Injector balance
- Enable 2 Step Rev Limiter
- Lower your fan on and off Temperatures
- Enable your Injectors on Deceleration
- Fine Tune Steering Damper resistance 
- Mode A, B and C Mode
- Disable exhaust Servo motor Fi Code
- Disable Secondary Throttle Plate Fi Code
- Disable O2 sensor Fi Code
- Disable Pair Valve Code Fi Code
- Disable ISC Fi Code
- Disable Steering Damper 
- Tune in some Light Pops and Bangs just for some entertainment on deceleration
 
This will get rid of annoying Fi Error codes, improve your bikes day to day running temperatures, make it more responsive, smoother, often lighter on fuel, more reliable and even a bit more powerful, without touching fuel settings.
 
We don’t need the bike on our dyno for this; we don’t even need the bike.
 
We can also return the mapping to stock and reload the de-restricted maps as many times as you'd like for no extra charge
 
All we need is for you to remove the ecu, arrange collection for the Ecu,
I will make some adjustments and we will send it right back to you.
 
Base Price is R1500 for the flash and an additional courier fee, that we can arrange with you directly.
 
The Ecu Flash takes about an hour, if you come into our workshop you are welcome to wait or if you courier it to us, we will do our best to send it back to you the same day,
 
If you have any questions, concerns or special requests please don’t hesitate to give me a shout, WhatsApp is the best way to get hold of me - David 079 189 6672
Leave a message and I’ll get back to you as soon as I can.